About Our Plainfield Metal Roof Coating Work
What Happens Between the First Roof Walk and the Last Coat?
Here is how we go about our Plainfield metal roof coating work, from the first roof walk to the last thickness reading.
- Inspection before any price
- Repairs listed separately
- Thickness measured
What Guides Everything About Our Plainfield Metal Roof Coating Work
Everything about our Plainfield metal roof coating work starts with a roof walk. We look at screws, laps, rust, curbs, and drainage, and we take photos so you see what we see.
The scope lists repairs first and coating second, so the price for each is clear. If coating will not fix the roof, we say so.
- Commercial roofs only
- Repairs before coating, every time
- Film thickness checked with a gauge
Want Your Roof Walked?
Send the address and we will set up a time to look at the roof with you.
What a Roof Walk Covers
Each walk checks the same list, so nothing gets skipped.
- Screw rows sampled for loose or stripped screws
- Side and end laps checked for gaps
- Rust mapped at eaves, laps, and panel ends
- Curbs, fans, and pipe boots inspected
- Ponding areas marked and drains checked
- Skylight panels checked for cracks
- Adhesion test on the existing surface
- Photos and notes for the written scope
What We Will Not Do on a Roof
Some roofs are not coating jobs. This matrix shows how we handle the common cases.
- Usually Fits
- Sometimes
- Rarely
| What You See On The Roof | We Coat It | We Repair It First | We Point You To Replacement |
|---|---|---|---|
| Coat over loose or missing screws | Rarely | Usually Fits | Rarely |
| Coat over wet insulation | Rarely | Sometimes | Usually Fits |
| Coat rusted-through panels | Rarely | Sometimes | Usually Fits |
| Coat curled shingles | Rarely | Rarely | Usually Fits |
| Coat a clean, dry roof with tight joints | Usually Fits | Rarely | Rarely |
Ask About Our Plainfield Metal Roof Coating Work
Call or send the address, and we will walk the roof with you.